How do i connect the ACE board?

[yaaaowHuggs]

Hey, i've got an ace board here and i'm pretty sure i'm supposed to be able to plug it into my pc board but i theres no hardness... so how do i connect my ace to my pc board?

[afortuna]

Hammer and a nail? Staples? Superglue? BigEvil?

[yaaaowHuggs]

that wasnt helpful!

[kcpaintballpage]

http://www.airgundesignsusa.com/xmag/html/index.html

[Looper]

for a small fee I can make you a cable that has the proper plug on one end and loose wires on the other. I can also do the same for a warp emag cable. PM me and we can work out the details.

[BigEvil]

I forget exactly which wire, (maybe the orange one). needs to have a crimped on connector that lets you put the end into the proper 'plug' that fits into the ACE. Hit Looper up on his offer, if not I know Tuna can rig you up the appropriate harness.

[afortuna]

that wasnt helpful!

I thought it was very helpful once you get past the sarcasm at the start. PM Bigevil here on AO. He knows what he is doing and could probably help or put you in touch with those in the know. Best of luck.

[Tunaman]

I have everything to put the 4 pin connector on, but you still have to solder a wire to the board...
Working on 1.25mm molex connectors isn't cheap as the crimper is 180.00 alone.

[Looper]

I have everything to put the 4 pin connector on, but you still have to solder a wire to the board...
Working on 1.25mm molex connectors isn't cheap as the crimper is 180.00 alone.

I see you got the "cheap version" of the crimp tool for $180... Mouser charged me $196.86 for the tool when I bought mine last month...

[yaaaowHuggs]

Hrmm alright, thanks everyone!