building new mag ?'s

[paintball72]

i did several searches but could not find the answer i required so help would be much appreciated

i am thinking of building my own mag and am wondering if i am missing anything from my parts list.

1 rt valve
2 rail
3 intelliframe
4 lvl 10
5 ule body
6 macro line kit
7 bike foregrip
8 cp on/off asa

i am wondering if that is all that i need to put together a mag and be able to screw on a barrel, hpa tank and shove a hopper on to play.

Extra ?'s
1) Is there any other improvment to the x valve over the rt valve other than weight and the fact that it can be anoed?

2) Is there a specific rail that i need to hold all of this together or will any agd rail do?

3) I also have the opportunity to get a good deal on an e-mag valve and am wondering if that only works with e-mag lowers or if it will work with any agd gripframe?

thanks guys for your help, hopefully ill be a member of the automag community before summer.

[halB]

i did several searches but could not find the answer i required so help would be much appreciated

i am thinking of building my own mag and am wondering if i am missing anything from my parts list.

1 rt valve
2 rail
3 intelliframe
4 lvl 10
5 ule body
6 macro line kit
7 bike foregrip
8 cp on/off asa

i am wondering if that is all that i need to put together a mag and be able to screw on a barrel, hpa tank and shove a hopper on to play.

Extra ?'s
1) Is there any other improvment to the x valve over the rt valve other than weight and the fact that it can be anoed?

2) Is there a specific rail that i need to hold all of this together or will any agd rail do?

3) I also have the opportunity to get a good deal on an e-mag valve and am wondering if that only works with e-mag lowers or if it will work with any agd gripframe?

thanks guys for your help, hopefully ill be a member of the automag community before summer.

I'm not an authority on this, but I have HEARD that the emag valves are the exact same as the RT ones. In other words, they will work with all mags.

[paintball72]

i know somebody knows.... please

[dstud2000]

you would need a sear and sear pin, rail bushing, front frame screw, field strip screw, vert asa and asa screw to mount your bike grip

[paintball72]

ok thanks