I was talking to a person on Warpig and was telling me about a 9v to 12v conversion for the revy. if someone could fill me in on how to do this I would much appreciate it. thanks.
-
-
Well...
For a convertion from a 9v to a 12v you would need the prop of the 12v and possibly the chip for it. If I were you though just forget about doing that and buy yourself a 12v if you really wanted one. I think there 40 bucks at www.acepaintball.com -
There are two sites that I found that have the required parts to upgrade from a 9 to a 12V Revvy:
www.dropzonepaintball.com
and www.countypaintball.com
County paintball has the X-board--which is the main part of the upgrade--for $10. Dropzone and Ace both sell it for $20. But you should get the rest of the parts from Dropzone: 12V Revvy sides, lids, and propeller. These parts are relatively cheap. DON'T BUY A NEW SERVO!! The servo from your 9V will need to be used for your 12V (they use the same one.) You can build a brand new Gem Revvy for $40. BTW--Ace paintball sells them for $65 (all black ones are $60...) Wouldn't you like to spend the extra $20-$25 on another Mag upgrade? Plus you can be proud that you put it together yourself...
P.S.--if you would just rather buy one, check out
www.predator-paintball.com
They have some of the cheapest prices around.Last edited by Vex; 02-21-2002, 05:07 PM."Otaeri wa doko desu ka?"
------------
--Duct tape is like the Force. It has a light side, a dark side, and it holds the universe together.
------------
Think you're ready, Grasshopper?
www.ohioshaolin.comComment
Comment