I got my tac one and gased it up and it shot just fine. Next day I went to play and the marker wouldn't gas up completly or something. It would not fire at all. So I took the X valve out and oiled the bolt and the on/off and replaced it. The marker would fire for a few shots and then stop working. I installed my ULT and the marker would fire maybe 50 shots and then stop working untill I degassed and gassed it back up and it did the same thing for the rest of the day. I went to play today and the Marker isn't working at all again. PLEASE HELP! I thought I was buying quality and am very unimpressed with this marker.
-
-
Step 1: drop 5 drops of oil in your asa before a day of play. and dryfire about 50 times with the barrel off.
Step 2: repeat step 1 untill youve shot about 10 cases of paint, then you can slow down on the oil a little.
takes a bit of time to break in extra oil helps with this!
if its still giving you problems. you might have over tightened the thumbscrew. just make sure the screw that holds the valve in is no more then snug.
Comment