How many carriers come with a lvl 10 kit, and what exactly are they labeled as?
-
Remember, nitrogen hits harder!
Originally posted by minimag03 -
not the best response but,
1. Enough
2. They are not labeled so put them in a baggie and mark LEVEL X SHIMS on it
If you are concerned with mixing them with ULT you can get a micrometer or if you have a good eye you can tell the difference of thickness. -
You will have enough, they stopped including most of the huge ones since most AGD bolts are within a thou or two of spec.Originally posted by SOAD8789
A line on a carrier means a full number.
A dot on a carrier means a half.
The higher the number, the larger the carrier.
0 = no lines or dots
0.5 = .
1 = _
1.5 = _ .
2 = _ _
2.5 = _ _ .Comment
-
I need to know because I'm ordering carriers from tunamart because the lvl 10 that came with the mag I bought is poorly tuned and the carrier thats in there right now is far to tight. On the tunamart website, it says to specify which size carrier you're buying, and I need to know how exactly to specify, but it would be easier to get them all. I just need to know how many!Remember, nitrogen hits harder!
Originally posted by minimag03Comment
-
I think the new kits have 4-5 carriers. If your current carrier has 1 line, then I would get a 1.5 (1 line 1 dot) 2.0 (2 lines) and a 2.5 (2 lines 1 dot).Originally posted by SOAD8789
Good luck.Comment
Comment