This sucks....

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TheSneakyPengui
    President of AGD (kiddin)
    • Oct 2001
    • 156
    #1

    This sucks....

    Well I was Intellifeeding my stock frame and I was done! So I put it all together and tried it out, nothing happened, so I took off the grips, and was I mad, When I glued in the little Roller Switch some of the glue or something must have gotten to the switch , because the switch was glued completly, you couldnt even move it, so Ill have to go pick another up tomorrow, b/c radio shack is closed now!
    Team GoodFellas
    "Nothing personal, its just buisness"

    68 AutoMag Classic S/F
    68 3000 Flatline System
    Red Kapp Drop Zone 2
    Red Redz Tank Cover
    Red Redz 3.2 Dimension Pack w/ Belt
    12" Smart Parts Progresive
    12 Volt Revolution
    Front Foregrip


    I Intellifed my stock frame:D

    Soon to Come...

    :D!2002 Matrix LCD!:D

    See me ripping it up at Canobie
    Paintball-Windham NH

    Ill be on the Airball field :-)

    Wana buy a pen? There very pretty!

    "Stay close to your friends,
    stay closer to your enimies"
    The Godfather I
    Tags: None
    • personman
      #2
      DO NOT GLUE IN THE SWITCH
      If you stick another piece of plasic this is big enough to fill in the gap, do that. Its not permanent. Its waht I did. I used a small piece of plexiglass (its pretty much clear plastic) and it works fine, I have shot it. I havent gone 13 bps or anything yet, but it seemed pretty snug. try that, and if that doesnt work, make a bracket.

        Comment

        • BEEFYSAUSAGE
          front bunker monkey boy
          • Dec 2001
          • 134
          #3
          sneeky

          you dont have good luck with mags do you?!!
          Feel the fire ...Feel the passion..And let it consume all.......
          smartmag(splash blue sm00672)
          max attack 68ci 3000psi
          Z Grip(Intellifeeded)
          intellifeeded stock grip
          16inch smartparts barrel
          12 inch perfect bore ceramic series
          18v shredder (old veiwloader)
          and a good dose of class.

            Comment

            • TheSneakyPengui
              President of AGD (kiddin)
              • Oct 2001
              • 156
              #4
              It...

              It seems like I dont! lol
              Team GoodFellas
              "Nothing personal, its just buisness"

              68 AutoMag Classic S/F
              68 3000 Flatline System
              Red Kapp Drop Zone 2
              Red Redz Tank Cover
              Red Redz 3.2 Dimension Pack w/ Belt
              12" Smart Parts Progresive
              12 Volt Revolution
              Front Foregrip


              I Intellifed my stock frame:D

              Soon to Come...

              :D!2002 Matrix LCD!:D

              See me ripping it up at Canobie
              Paintball-Windham NH

              Ill be on the Airball field :-)

              Wana buy a pen? There very pretty!

              "Stay close to your friends,
              stay closer to your enimies"
              The Godfather I

                Comment

                • Cha0tic
                  g0t mag?
                  • Feb 2001
                  • 1990
                  #5
                  i'm intellifeeding a stock frame right now....should be done by tomorrow. the hardest part is just getting rid of all the crap that i have to clear out to make room for the switch...

                    Comment

                    • than205
                      Dancer of the kookie jig!
                      • Dec 2001
                      • 947
                      #6
                      I'm embarassed to say this but....

                      I bought the switch. I looked at hogging out my stock frame to fit the switch. I decided not to. What I did do was rigged a wire to the frame. (grip frame seems to be sufficiently conductive) Then I rigged a wire behind the sear pivot point. So that at each trigger pull the sear contacts the wire and completes the circuit. The parts I used seem a little hokey. So I'm working on thinking up better components. Otherwise I shot about 100 rounds through it and dry fired it a 100 plus times. Seems ok. Field test will be appropriate at this point.
                      Thanotos

                      http://www.factcheck.org

                        Comment

                        • personman
                          #7
                          Chaotic, thats what I thought. Just wait until you get to the wiring. (actually the gutting is pretty easy with a dremel, if you have the right bits)

                          P.S. DO NOT CUT THE RED WIRE!!!

                            Comment

                            • than205
                              Dancer of the kookie jig!
                              • Dec 2001
                              • 947
                              #8
                              personman,
                              Could you post some pics of your hack?
                              Thanks,
                              Thanotos

                              http://www.factcheck.org

                                Comment

                                • MidgetFista
                                  British Bulldog
                                  • Nov 2001
                                  • 54
                                  #9
                                  is Intellifeeding really worth doing? I'm considering doing it when my Intelliframe arrives.

                                  Midge

                                    Comment

                                    • TheSneakyPengui
                                      President of AGD (kiddin)
                                      • Oct 2001
                                      • 156
                                      #10
                                      Deffinitly,....

                                      and it is so easy to do with the intelliframe!
                                      Team GoodFellas
                                      "Nothing personal, its just buisness"

                                      68 AutoMag Classic S/F
                                      68 3000 Flatline System
                                      Red Kapp Drop Zone 2
                                      Red Redz Tank Cover
                                      Red Redz 3.2 Dimension Pack w/ Belt
                                      12" Smart Parts Progresive
                                      12 Volt Revolution
                                      Front Foregrip


                                      I Intellifed my stock frame:D

                                      Soon to Come...

                                      :D!2002 Matrix LCD!:D

                                      See me ripping it up at Canobie
                                      Paintball-Windham NH

                                      Ill be on the Airball field :-)

                                      Wana buy a pen? There very pretty!

                                      "Stay close to your friends,
                                      stay closer to your enimies"
                                      The Godfather I

                                        Comment

                                        Previous template Next
                                        Working...