retro valve/hyperframe ?s

[paintball72]

well this is my first mag, i've been piecing it together for a while now and ive got all of the parts that i need i am just having a few difficulties.

1)i do not know how the get the on/off set up on the retro valve. the guy i bought the valve from set a kit of all the parts id need to get it working so here's what i have,http://www.putfile.com/paintball72/albums what do i need to use and how do i stick it together. (i know the pin and silver silender in the upper right hand corner are used)

2) the pic in the link above that i am holding a on/off pin is the one that came with the hyperframe that i just purchased and am wondering how i place this in the on/off assembly.

thanks a bunch guys

[paintball72]

please

[flyingpootang]

From what I see the only RT parts you have are the pin your holding and the brass rt on/off top (the second row top) all the rest are classic valve parts. If the pin is a Hyperframe on/off pin I wouldn't use it because they where known for chewing up sears. The best bet would be to buy a ULT to use with the Hyper frame. The best upgrade for a Hyperframe is a universal T-Board installed from here: http://www.scenariodreams.com/produc...rsaltboard.htm If you can't install it yourself, they'll do it for 35.00. You don't need eyes if you buy a L10 bolt. Here is a pic of mine I just finished putting together.

[paintball72]

bugger that means ill either need to get my retro valve drilled for a ult or buy an x valve. psh i should have know that this project couldnt go as planed, they never really do ... oh well does anyone know anyone who can drill a retro valve for ult and how much it will cost.

thanks a bunch

[flyingpootang]

Depending on your valve it may already be factory ready to except a ULT. I use a RT on/off with a .750 pin, quad o-ring, and the larger white o-ring instead of the ULT in mine. That way you don't have to mod your valve and buy a ULT. The cost of the of the RT on/off and o-rings will be around 25.00

[paintball72]

cool, do you know where i can pick that stuff up
well found what i need at tunamart, so i guess ill be sending tuna a pm soon.

thanks guys