I need help finishing up my Timmy-mag. I have all the parts, but it needs a little milling and loving. I am moving and have too much going on to finish this at my place so I need some help cause I want it done very quickly. I need a little milling, tapping and a bit of magic for this. Here are some pictures:
Here is what I need done to it:
1. Mill down the ram a bit so the sear can come forward. I think that will fix some of the issue because right now the ram is pushing against the sear when it's just sitting there and doesn't give it any room to swing back and forth.
2. If the ram can't be milled enough then the frame screws need to be re-milled which might make the frame slide back and forth a bit so that might be an issue.
3. Install a LPR. I have a tickeler coming in the mail right now I picked up from ebay so I'll include it with the everything when I ship. I would like it to come out the front so the ASA might need to be tapped, but I'm not as worried about that right now. I'd rather just get it firing now with a lpr attached to the vert asa or the bottom on/off. Then when I'm happy with it working then I'll get the vert asa tapped.
4. The top rim of the frame looks like it was milled down and is a bit uneven so it would be nice to get that all smooth and milled down. Ultimately I'd like to see a groove notched in the rail for the frame to just sit in and not move. I don't know if thats possible with how ULEd the rail is.
5. The X-valve needs to be tuned to the frame. It has an ULT kit so this should be easy. Also the LvL10 might need a few tweaks so I'll include all the spaces and such.
6. The eyes need to be installed. I don't know if this will work because the Timmy eyes are like little light bulbs so if there is another option for this I'd love to hear it. The eye holes in the body right now are too small for the Timmy eyes so I'm thinking either have the holes opened a bit or get different eyes that would work on the Timmy board.
So basically I'm looking for someone who knows what they are doing and can finish this project for me quickly and for a reasonable price. I have gear for trade as well if someone is interested. This should be an easy fix and fun project. I have never seen a Timmy-mag before so I'm exctied to see this up and running ASAP.
Please pm me or email me if you think you can do it and how much it would cost. I'm aware that prices might change once you see everything so just give me a rough estimate. Thanks.
Ross IV
[email protected]
Here is what I need done to it:
1. Mill down the ram a bit so the sear can come forward. I think that will fix some of the issue because right now the ram is pushing against the sear when it's just sitting there and doesn't give it any room to swing back and forth.
2. If the ram can't be milled enough then the frame screws need to be re-milled which might make the frame slide back and forth a bit so that might be an issue.
3. Install a LPR. I have a tickeler coming in the mail right now I picked up from ebay so I'll include it with the everything when I ship. I would like it to come out the front so the ASA might need to be tapped, but I'm not as worried about that right now. I'd rather just get it firing now with a lpr attached to the vert asa or the bottom on/off. Then when I'm happy with it working then I'll get the vert asa tapped.
4. The top rim of the frame looks like it was milled down and is a bit uneven so it would be nice to get that all smooth and milled down. Ultimately I'd like to see a groove notched in the rail for the frame to just sit in and not move. I don't know if thats possible with how ULEd the rail is.
5. The X-valve needs to be tuned to the frame. It has an ULT kit so this should be easy. Also the LvL10 might need a few tweaks so I'll include all the spaces and such.
6. The eyes need to be installed. I don't know if this will work because the Timmy eyes are like little light bulbs so if there is another option for this I'd love to hear it. The eye holes in the body right now are too small for the Timmy eyes so I'm thinking either have the holes opened a bit or get different eyes that would work on the Timmy board.
So basically I'm looking for someone who knows what they are doing and can finish this project for me quickly and for a reasonable price. I have gear for trade as well if someone is interested. This should be an easy fix and fun project. I have never seen a Timmy-mag before so I'm exctied to see this up and running ASAP.
Please pm me or email me if you think you can do it and how much it would cost. I'm aware that prices might change once you see everything so just give me a rough estimate. Thanks.
Ross IV
[email protected]
Comment