trigger not bouncing back

[Spider-TW]

Add oil.
Don't over-tighten the frame screws.

Have you tried different tension in the frame screws? Generally the front can be wrench snug, but the back is finger tight. Sometimes they need more or less to get the alignment right.

Is this a stainless or ULE body?

[ll05]

Have you tried different tension in the frame screws? Generally the front can be wrench snug, but the back is finger tight. Sometimes they need more or less to get the alignment right.

Is this a stainless or ULE body?

Stainless right feed body. Yeah I might want to try different tension in the frame screws.

[athomas]

Change the bolt spring. If that doesn't help, then you need a longer powertube spacer.

[Hilltop Customs]

when you pull the valve out does the bolt spring stick out past the nose of the bolt? if not your bolt spring probably needs replaced.