emag valve compatability

[ll05]

Can an emag valve be used in a classic mag? Sorry this is my first mag and I don't know alot of this stuff.

thanks

[mag79]

I used it on my with no problem

[ll05]

Okay cool thanks because I was planning to buy this from someone once i came up with the money

[athomas]

The emag valve is a retro valve. Retro valves and classic valves are interchangeable. The only thing you may want to change is the on-off pin. A standard retro valve pin is .750" in length. The emag pin is probably .712" in length. You may have full auto issues if you use it. If you have problems just buy a longer pin.

[ll05]

so i dont need a new sear right?

[Ruler_Mark]

on the classic gun, no,, but if you try to use a emag sear you will run into problems.

[athomas]

If you are putting the valve into an existing gun, no other parts are needed, except maybe the mentioned on-off pin. They are a drop in replacement.

[Darthmag99]

I have 2 classic style mags with emag valves and they work without issue.

[PhoenixWolf]

I've done it. No problems. With a single trigger, yes, you can make it bounce with the E-Mag on/off by pulling the trigger from the side. Actually, I got it to do it with a stock on/off, too. You won't have full auto problems. It's entirely controllable. It only does if you intentionally pull the trigger like that. It's cool to see, though, and a good sleeper for people who underestimate the Mag.

[ll05]

okay thanks now to sell my pellet rifle for the money for an emag valve

[211]

must be a heck of a nice pellet rifle

[ll05]

must be a heck of a nice pellet rifle

Haha it's decent I just don't have a place to shoot it .