jerry-rigged replacement for safety spring and ball?

[Redbeard the Pirate]

Long story short, I took apart my emag lowers and lost the spring and ball for the safety and selector switch. I love AGD and I'd like to just buy the replacements, but I'm supposed to play on sat and I don't think they'll be able to get them to me by then plus the springs and BB's are what? $.50?

Anyone have any luck rigging up some readily availble spring and bb or something to work? I'd really rather not tape my safety in the "fire" position all day!

[flyingpootang]

Use an o-ring around the selector for a temporary fix...

[Geronimo7]

putting the gun in "e" mode and leaving in the yellow pin would also kinda work as a saftey
i think

funny thing is same thing happend to me, but turned out both my spring and bearing flung to the trigger magnets i must have looked for an hour before i looked on the trigger

good luck

[Storminnorman]

I just called agd Monday and the ball is a simple bearing and the measurement he gave me was .0935.

[Redbeard the Pirate]

Alright, so far the plan is to remove the safety (wow that's creey :S ) and use the yellow pin, selector switch, and air on/off to keep safe, and using an Oring around the selector switch to keep it from moving. Now I need to find a good fitting Oring :)