Tell me a little about a BKO

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • punkncat
    One foot less
    • Feb 2003
    • 5841
    #1

    Tell me a little about a BKO

    Its been a while since my bushy, and given that this is a different animal anyway.
    First off is there anywhere to find an owners/operation manual for this marker?
    I tried ICDO and it requires you register. I did note that a few users there are common to here...

    What OP do these normally run at?

    How do you adjust the LPR, as in which way is down, which way is up, and how to find the optimal setting.

    Are there any settings as far as the board is concerned? It appears not, but thought I would ask.
    Tags: None
    • trevorjk
      <S>WooLooLoo</S>
      • Dec 2002
      • 4324
      #2
      the stock lpr is turn in till very slight leak then turn out 1/4 turn.

      if memory serves me right operating pressure was around 250-300ish

      and the BKO is a fasor, blow forward ram with spring return.

      i can go on, but i need more questions.

      as for boards, they are dipswitch boards if i recall correctly
      t33kyboy "So if a cat is dropped from 11 inches, it will most likely die."

        Comment

        • punkncat
          One foot less
          • Feb 2003
          • 5841
          #3
          Well I found the problem. The LPR is missing the reg seat and brass ring.
          Is there anywhere to find stock parts for these anymore? I found a zenitram adapter to convert to a cocker LPR.

            Comment

            • trevorjk
              <S>WooLooLoo</S>
              • Dec 2002
              • 4324
              #4
              i have no idea where to find parts for those anymore

              that would be a question for ICDO. also, i believe the promasters are the same thing? might be able to get an LPR off of one of those. again, questions for ICDO
              t33kyboy "So if a cat is dropped from 11 inches, it will most likely die."

                Comment

                • pk5
                  Registered User

                  • Jan 2006
                  • 608
                  #5
                  you should register for icdo, just because most of the member that answer technical question are either on there. Or another option is to post the question on mcarterbrown, since pump, harbringer, and vdub visit those frequently and answer most of the questions.

                  As for the lpr, you can probably find a used one on icdo or on pbnation, they are usually pretty cheap.


                  I don't think the promaster lpr will work on the bko, even though i think it work on the b2k4.


                  and this site wouldn't let me upload attachment....at least the pdf file for you

                  There are some lpr for sale here:

                  http://www.icd-owners.com/html/index.php?name=Forums&file=viewtopic&t=12396&highlight=bko



                  5 buck each, probably will save you the time to go find the parts anyway.

                    Comment

                    Previous template Next
                    Working...