what to do setup double trigger

[thegrayghost]

ok, i bought a benchmark double trigger/w safety...i have a classic/single trigger and wanted the double trigger on the marker...i take all apart and nothing looks like it will fit/interchange into the double trigger from the single trigger....i am dumb and i guess did not research this better....what changes do i have to get to make this double trigger work? thanks, thegrayghost

[Coralis]

if the new double trigger frame is for a mag you should only have to pull the old frame off and put the new one on ... the only tricky part is making sure you get the trigger rod to slide down in the right spot

[questionful]

nothing looks like it will fit/interchange into the double trigger from the single trigger

I don't know what you mean, all you do is take the old frame on and put the new one on. There is nothing inside the trigger frame. The sear goes in there, but it's not attached to the frame in any way, it's attached to the rail with the sear pin. Just slide it into the frame, like you did with your other frame. Are you saying you got a benchmark frame but no double trigger for it?

[thegrayghost]

i am imbaressed, it was so easy, i forgot....had a ule/umf/rt, that i traded and just plain forgot, kept my level 7 and using it more these days....frame is in and test fired, everything is fine...

thank you Coralis & questionful for your time.....thegrayghost.....

[questionful]

Glad you got everything working! Enjoy the level 7!