Cf frame Rail bushing?

[skyless]

I just got a cf single trigger frame to fool with and was wondering why the hole for the rail bushing is so big. Even with a standard rail bushing it still has alot of play from side to side. I dont want to tighten it too much since that messes with the valve action. SO do i just make a custom bushing or what. Thought they were all the same hole size. Help please

[Madmarx]

sounds like you have an rt classic frame.
put a power tube spacer in there with the bushing.

[skyless]

Thanks, Ill try that as soon as i get home. Thought that all the cf frames were the same.
I love mags but seems like there are so many parts for so many different application that it is hard to get what you want the first time.

[questionful]

sounds like you have an rt classic frame.
put a power tube spacer in there with the bushing.

I didn't know a powertube spacer was used for that! Thanks!

[skyless]

sounds like you have an rt classic frame.
put a power tube spacer in there with the bushing.

Powertube spacer did not work, but i did find some 1/4 inch poly tubing that fit great. I just cut a small section to fit in the gripframe, sanded it down just a tad and it fit perfectly. Thanks for the help anyway.

[Madmarx]

Didn't work???
Why not?