Adjusting RT?

[[email protected]]

Hey all,

New to mags... I just got my hands on an automag RT pro...

Is there a way to adjust the ROF on these markers?

I've done some test firing and I'm not getting the "automatic" type of firing. Only semi-auto. Any ideas?

Thanks in advance.

[211]

You need a higher than 850 psi air source, such as an adjustable tank, the higher the input pressure the faster it will RT

[freepunk]

Everything you need to know about Rapid fire...
Rapid Fire, RT effect information

[Don Carnage]

That's a great website. Great link, Freepunk.

I put a NitroDuck Ireg on mine with the 1,000 PSI output shim and still didn't get any RT. The triggerpull was very snappy and I preferred it to the ULE.

Then WickedKlown2 told me to switch the on/off pin with an E-Mag on/off pin (teensy bit shorter). The result wa rapidfire like I couldnt beleive.

[russc]

Hell, I just ground my on off pin down a tiny bit and it helped.

[Spider-TW]

Level 10 shims or ULT shims work in the RT on/off.

My 3k flatline would not push my unshimmed on/off to RT, but like Zak said the max-flo works. You just have to be your own reg tech.