Xvalve Leak

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • indecisive
    Registered User
    • Nov 2006
    • 50

    #1

    Xvalve Leak

    This is my first mag so I'm a little stumped.
    When I gas it up after a few seconds it starts leaking from the back of the valve.
    Is it a seal issue or possibly just fixable by lubricant?

    Edit: Ok maybe worse than I thought, stops leaking but doesn't always recharge very fast. might be user error pulling the trigger though.
    Last edited by indecisive; 08-13-2008, 04:10 PM.
  • Sumthinwicked
    team id psycho AO-CT
    • Nov 2005
    • 4292

    #2
    turn it down with allen key until it stops leaking it might be to shooting hot they do that if thats not the case u have to tech it further air valves do that to gl

    Comment

    • indecisive
      Registered User
      • Nov 2006
      • 50

      #3
      I tried turning it down as it was mentioned in a previous post on here but that didn't help,
      I'm sorry for not listing that.

      Comment

      • athomas
        Of course it works-its AGD
        • Jan 2002
        • 8039

        #4
        The problem is most likely a bad regulator seat oring. As the pressure builds due to the high pressure leaking past this oring, the overpressure release eventually opens and vents out the excess pressure out the back.
        Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        Working...