leak out the barrel

[hurleyhonda22]

What is the cause for a Leak out of a mags barrel? I dont know much about this gun. Someone just gave it to me. It is a smartmag.

[Heiliger Bimbam]

Hi,


1. Remove the bolt.
2. Unscrew the brass tip with a coin
3. Remove the spacer from the powertube and replace the oring
4. Done

[athomas]

Leak out the front could be one of two things.

1. a bad powertube oring. This can be fixed by changing the powertube oring.

2. a powertube spacer that is too long. This is usually caused by putting in the wrong spacer for your valve/body setup, or by a sear that is starting to wear. You can fix the problem by putting in a shorter powertube spacer. As the sear continues to wear, you will eventually need to replace it but you should get lots of use prior to that as long as its not worn too bad. As long as the sear is not causing full auto problems, you can compensate for the wear by using increasingly shorter spacers.