i just ordered an intelliframe from agd and was wondering if there is any type of special adjustments or something.
-
polished intellimag p/f/r,
Smart Parts Progressive,
intelliframe,
KAPP foregrip,
Kapp foregrip extender,
offset benchy drop forward cradle on/off,
crossfire 68ci 3000 psi,
12v. smoke/clear rev. -
if your putting it on an RT PRO or 68automag/minimag, it should bolt on, no questions asked. though if you orderd it to put on a classic RT, and didnt specify it was for a classic RT, you may have to drill out a larger hole to compinsate for the gas-through field strip screw. -
classic rt as in an automag classic with a retro valve? or as in the good ole rt when it first came out? explain "gas thru field strip screw" thanks.Team Jolly Leprechauns
Please Visit Our Sponsor:
http://www.specialforcespaintball.comComment
-
He means classic RT as in the old school RT's. The old school RT's use the banjo bolt which is a "gas thru field strip screw". Since air travels through the rail on the RT, the banjo bolt must be used. It's has a larger diameter than the normal field strip screws, so the Intelliframe requires you to drill the rear hole out to compensate.
Comment
Comment