lvl x choping when low on air?

[outreach]

so ya usually i fill up before i get down to 1200psi but i was in a game and had to use alot more air then i thought and once i got down to the 1300-1200 mark it just turned into a blender

[Zone Drifter]

What most likely happened is that the bolt didn't have enough pressure to push the ball completely out of the barrel and fire it, but then the next ball did and so when the next ball was shot, it blew into the one already in the barrel. It's chuffing, and that's what caused alot of my chops early on when I first started using the level 10 bolt.

I am almost sure that was your problem, but if anyone else has a suggestion, please do tell.

[outreach]

might be right, any ideas how to corect that?

[Zone Drifter]

The only thing I did, was re-checked the lvl 10 shims and carrier size along with the spring (spring could bee too tight for velocity). If that doesn't' work for you, try loosening the thumb screw a bit. (one that holds the valve in) One of the valves I have was extremely picky, and would rub on the inside of the body if I didn't loosen that screw a bit, causing it to not even fire sometimes.

[outreach]

alright thanks