is there a way to run a classic valve with a hyperframe? I ask because when i dont go to the local feild i go to a friends, who has a nice woods feild but he only has a 100lb co2 cylander and when i run out of compressed air for my hypermag i am forced to use one of my older markers.
-
-
Works just fine (at least the 13bps version). As far as I know, they were originally made for the classic.sigpic -
well i have the 20 bps but i dont think that there is much difference so i guess ill be getting a classic valve soon.
just to clarify that is with the stock on/offComment
-
Originally posted by paintball72
I tried my hyperframe with an rt on/off and it didnt work. I had to get a ule trigger kit for the frame to work. The solenoid in the frame doesnt have the muscle to work with the stock on/off.Comment
-
by stock i mean stock classic on off not the rtComment
-
You need either the ULT or the Centerflag on/off. Otherwise the noid will not be able to trip the sear.Comment
-
The hyper will not work with the stock classic on-off. Like warbeak said, you need the centerflag or ULT on-off.Originally posted by paintball72Comment
-
ok then i guess i just go forward and get my retro valve milled for a ultComment
-
Originally posted by paintball72
I was recently in the same boat as you. I tried finding someone to mill my retrovalve. I wasnt able to find anyone to do it because even a tiny mistake in milling could ruin the valve. I ultimately ended up buying an xvalve with ule trigger kit. From what I was told tunaman can do the milling but Im not sure on that.Comment
-
I got mine milled... $30... Tunaman
Contact Tunaman, I have a centerflag on my RT classic Tunaman did the milling on my on/off for $30 + shipping, he did a great job and AGD supports his work! as for the milling, DONT do it yourself, or have just anyone mill your valve. Tuna does it with reasonable turnaround!
for tuna
I have a classic RT with the milled on/off ULT, hyperframe 20bps with upgraded noid (powershot) also had luke customs mill my hyperframe top, got the trigger, and the microswitch. last Luke did his Vertical feed mod to my body to work better with my Empire B2
(the loader works better with a short stack of balls)
I get 20bps when I have it set to ramp uncapped. It is my primary setup, I have a Lasoya Promaster with mad upps and my mag is a sleeper and I love that!
(with the powershot noid) you might get away with the classic on/off, it has alot more force then stock ones, they also draw less power! Link to powershot noid
It sais tippman 98/A-5 Ape board noid, it has the same size, draws less power, and has ALOT more force when tripped
Hope this was helpfull, I know all this research helped me alot and took quite a long time.
Boy was it worth it
Good luck bro
Comment
-
This doesn't solve your need for CO2 usage though. Isn't that the original problem?Originally posted by paintball72
Comment
-
minimag
i had a hyperframe with a classic minimag, shot fine or either gas, untill it got too cold for the Co2 of coarseComment
-
sounds like there should be a Hyperframe Sticky
i have an AutoMag RT Pro, do you know if Boo Yaah frames will fit
If only Hyperframes fit, i don't wanna have to buy a milled Hyperframe
BPS - Baller's Pro Shop - [email protected]- "Hellspawn" WDP Angel LED 99
- "Foxwood" WGP Autococker Bob Long Ironmen RF 97
- "Kenobi" WGP Autococker E-Blade blue VF 2k2
- "Raider Nation" AGD AutoMag CF ULE Hyperframe LX Hurricane
- "Gray Ghost" AGD ReTro Mag CF High Rise LX
Total Freak - Tips: 12" AA black, 10" Boomstick black
Bidness with Dover - FeedbackComment
Comment