ace wiring question

[Chris Nearchos]

okay, so i have a quick question about the ace wiring for anybody that might know.


i know the stock ace wiring has the orange signal wire on the molex plug and the 5 Volt power comes from the yellow wire being soldered to the fifth solder plug gown on the board.


so my question is, would there be a signal spot on the solder points? meaning solder the orange signal wire to the board instead of using the molex plug?


thanks ahead of time!

-Chris

[mostpeople]

From the looks of it the plug has a board terminal the same way the the other wire does.. but to be honest that just a guess..

[Chris Nearchos]

same idea

yea, i was figuring and looking at it the same way. but i would to see if anybody else would know anything about it.

-Chris

[Looper]

yea, i was figuring and looking at it the same way. but i would to see if anybody else would know anything about it.

-Chris

You can get 5v from the two extra slots on the 5 port molex plugs but I was unable to drive the ACE board with it. I had to tap into the BASIC STAMP header to get 5v to drive the ACE board.



On the Main board it is the 5th port from the top.

[Chris Nearchos]

actually, was asking about the the signal connection. would there be a signal post that i could solder to on those solder points on the main board.

Thanks though,
-Chris