Automag barrel with no porting.

[smoke63b]

Is there a well made, aftermarket barrel for the automag classic that has around 8 to 10 inches of unported barrel? Trying to stay 14" or less on total length as well. It seems like it's almost impossible to find a barrel that's not ported down to close to the body. I need at least 8 inches of unported barrel.

Any help is appreciated.

[Automagrt666]

Is there a well made, aftermarket barrel for the automag classic that has around 8 to 10 inches of unported barrel? Trying to stay 14" or less on total length as well. It seems like it's almost impossible to find a barrel that's not ported down to close to the body. I need at least 8 inches of unported barrel.

Any help is appreciated.

The stock automag crown-point and/or RT crown point barrels are very well made, and 10", why not go for those?

[smoke63b]

Are they fairly good? I admit I don't like the way they look but that's really not an issue. What bore size are they?

[Watcher]

Lapco still makes an Automag bigshot barrel in a 12 incher.

All the porting is in the last 2 inches of the barrel so that would work.
It's all stainless and shiny though, if that isn't your thing.

http://www.lapcopaintball.com/store/product_info.php?cPath=1_19&products_id=40

[questionful]

PPS barrels. Idk if they're still making them, but it's on their site.

http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=96&products_id=955

[smoke63b]

Wow those are insanely high. 75 bucks to start with no porting and if you want the porting on the end there's a 45 dollar choice and a 65 dollar choice. Possibly a 140 dollar barrel before shipping

[Dover]

i ran with a stock silver MiniMag barrel on my first Mag, it shot fantastic was was nice and light, very maneuverable

[questionful]

Wow those are insanely high. 75 bucks to start with no porting and if you want the porting on the end there's a 45 dollar choice and a 65 dollar choice. Possibly a 140 dollar barrel before shipping

It's PPS's way of saying "we don't like making twistlocks!"

But seriously. It wasn't until a few months ago that they started making them, and it's really hard to find a brass twistlock, nevermind a quality smooth-bore. It's got to be the only barrel I'd pay that much for.

[BiNumber3]

some stock mag barrels have no porting at all, just a sold piece of aluminum, not too bad as far as accuracy, but loud.

[questionful]

aren't all AGD barrels large bore? I'm not a fan of large bore.

[BiNumber3]

i think the one i have is .689, measured with some calipers at the rear

[automikey]

There might be one here:

http://www.mcarterbrown.com/forums/m...tml#post518062