New Xvalve problem

[secretweaponevan]

Yeah the ULT on/off o rings were dry...tossed a bit o lube on them and now it will shoot once upon gassing up then nothing. I now feel a bit of resistance on the trigger rod though. I have changed nothing with the sear/rod or anything. More lube or is it time to start looking in another area? Seems like it may have been a combination of problems not just one. Once again thanks for the help

Now it sounds like your on/off pin is too long and won't let gas get to the bolt. How many shims do you have in the ULE on/off?

[rabidduck457]

it looked like 2 but I could be wrong. I ended up playing the day with my friend's warpfed tac one. Had a good time but anxious to get my mags up and running. I guess I have time to piddle with it and research. I appreciate everyone's advice and will let you know what seems to work heh. I need to get my hands on some shims and spacers I guess...I have none.

[secretweaponevan]

Hrm. If you gas up it fires by itself and then will do nothing, but there is resistance on the trigger, it might be bolt stick. Press on the bolt with a squeegie and see if it resets.

Bolt stick is an easy fix. (Add oil, largest carrier that doesn't leak, stronger spring.)