vertical asa

[Dalm]

I've been looking at changing the tac one bicycle grip and putting something else there. I also want to move the lines around. What have you guys done for air through vert asa's. Anyone used a gutted reg? Any ideas are greatly appreciated

[michbich]

You can use a gutted reg or a gaz through foregrip. You can also run the air line from the valve straight to you tank ASA and use a non gaz through foregrip.

[Dalm]

already have a non air through grip with the stock bicycle grip on the tac one....I was just looking for some cool ideas. I was thinking of taking an expansion chamber magazine like the trinity but possibly something lighter to give it functionality and a different look.

[michbich]

I think the best wait to find something you like is to check the picture thread. By doing that, you can compare your marker to their setups and figure out what you like.

On a relative note, have you concidered the angled asa? I always liked those.

[Spider-TW]

I have an RPG grip and CP makes a similar one. They are grooved and tapered toward the bottom. The constraint with the RPG grip is that you must use a straight macroline fitting or direct steel hose in the bottom. IDK about the CP.

If you're right handed and don't switch a lot, I like the bottom line left to right valve in the back with steel hose which lets you do anything with the front.