ULT Trouble

[Coralis]

he is running a PE

My tank is a Pure Energy 72cu 3000psi. I called the store I ordered it from and asked what the output pressure was. The tech said between 750-850psi. Could this be a problem if my tank is putting out less than 800psi?

I didnt hear the shootdown though when he was using the rt on/off unless my hearing is getting that bad .

[DamianTC]

after looking closely I did have one L10 shim and one ULT shim.. and when I was getting ful auto, I had two L10 shims and one ULT shim. I now put 4 ULT shims in and it seems to be shooting fine so far... but I am still getting the whistling sound. The gun did not whistle with the x-valve on/off

[Dend78]

where is that whistle coming from?? it is out the back of the valve? if so i believe thats the reg piston thats causing problems there or at least the o-ring on it, those shims will get ya if you dont look close ive done that a few times myself

[DamianTC]

ok well I thought I had the problem fixed, but after shooting it today I found out that the problem is still there.. this is getting very fusterating because my Y-Grip just came in today and I am supposed to be playing tomorrow.. doubt it now that gun still isnt working. the shims in the L10 and ULT are really confusing to me. I am having a hard time learning the concept of them. The first question I have for this post is:

With using HPA, which doesnt change with temperature, is it true that once I have the gun setup correctly (number of shims, carrier size, etc) I should never have to change any of those settings?

2nd question: If I can not for the life of me get this setup right, can I send my gun to AGD and have them setup everything for me and send it back?

I like messing with paintball guns and adding accessories, but the only adjustments I like changing is the velocity up and down LOL

[secretweaponevan]

I'd next start by eliminating the remote as a source of the problem. (It looks like a small diameter hose)

Hook your bottle up on gun and see if that helps.

[DamianTC]

already tried that evan

[secretweaponevan]

Then I'd completely dismantle the ULT and inspect for bent/damaged parts. Then reassemble and lube.

[DamianTC]

I'd rather have it done the right way the first time, instead of me guessing what the problem could be.. can I send my gun to AGD to have them setup everything?

[Coralis]

yeah you'll have to give em a call and get a rma number or something like that.