well just got it and no problems. i just whant to get a manule or somthing so i know what i'm doing. it is version 3.2. there is a switch that goes mec, to elec, and then ?. I would like to get somthing posted on here that i could print out. please help thanks...
-
-
Originally posted by Dr.Demo
-
Comment
-
Thanks man.Originally posted by Dr.Demo
http://www.airgundesignsusa.com/manual.shtml basically has the solutions to 95% of the tech problems encountered here.
Comment
-
and the other 5% can be answered by AO
well, any question can be answered by AO....even ones that you dont want answered
Comment
-
So I was playing around, and found out i could use a classic valve, on my e-mag. I put the on off from the X-valve in a level 7 and it worked. It chopped a few balls but was able to keep up. So my Q:. is there any way to get it to work so that i get alot of shots per fill with my classic then the air hog X-valve. and I have been told that the two should work under the same psi but I cant get eather of my X-valves to run under 600...one with ult and the other E or RT on off.?????????
Comment
-
the x valve is as efficent as the classic, it is the lvl10 vs the lvl7 that is less efficent. just find a lvl7 bolt and but it on the x valve. It will create alot less problems.Comment
-
but will the level 7 chuff insted of breaking a ball. or will it just chopit it and keep going?..Comment
-
The level 7 will chop paint, not chuff.Comment
-
so basicly at high rates of fire you need a level 10 or else you get a mess?.......
I would rather shoot less with no mess, then shoot more with a mess.....
still wish I could lessen the gas consuption..Last edited by Dr.Demo; 11-04-2008, 10:08 PM.Comment
-
Well it really depends on your style of play and what type of loader you are using. I recently used my emag at a mini scenario and it worked great, I run it with a warp and apache and it worked great the whole day. The only time it chopped was when i forgot to turn on my apache after a reinsertion. So unless you outshoot your loader the lvl7 works just fine.sigpicComment
-
that just it. I play in the sppl, and thay don't let you put on anything that loads over 15bps. so basicly i just use the revey and have the gun set at 12bps cap. would a classic lvl 10 and the on off from the e-mag work and chuff not chop and be better on air??Comment
-
You should be fine since your capping off your emag at 12bps, but the best thing to do would be to play some speedball games at a local field with it first and see how it works for you. That way you can try it out before you go spend the money on a lvl 10.sigpicComment
-
I don't think the e-mag on/off will fit in a classic valve.
edit: nvm, I read a few posts up
But like GRimm said as long as you don't outshoot the hopper you won't chop.
Really, sppl won't let you feed over 12bps? Then that would mean that scenario players can't use Tippmanns with a cyclone feed since the stock cyclone feeds 17...
I think someone is hassling you around. The loader feed rate does not dictate the marker speed...
Besides, the only loaders that load around 12bps are like Revys, AKs, and Empire ReloaderIIs...Last edited by Watcher; 11-08-2008, 06:15 PM.Comment
-
no the sppl bps cap on a loader is 15. and since tippman is the main sponser thay don't care. nobody is jiving me in anyway. i just dont like a5's and i use a revy. the on off does fit on my classic and works. i just got a level 10 on a classic and will try it out this weekend. im not doing anything to my level 7 valve. im going to find out if a classic level 10 will out perform a x-valve as far as air. more shots per fill.......and not chop..
in the sppl there is no ball cap on a gun. and you can have up to two barrels and two hoppers. thay only cap the hopper at 15. If you cant load over 15 you cant shoot any faster.....Last edited by Dr.Demo; 11-08-2008, 07:19 PM.Comment
Comment