Best place to send

[rapala15]

Hey, I've got an old 68' classic that I used to play with a good 6 years ago that I really liked but it broke and my local paintball store couldn't fix it and I was too cheap to try and mail it anywhere. where is the best place to send to get repairs? or is there somewhere to.

When i put air in it you can hear it go in, but it like doesnt build up to where it can fire if that helps.

[ManInBlack]

Just get a parts kit and replace the orings. www.airgun.com

Actually, first you should put some oil in the air inlet and try gassing it up again. That fixes them sometimes.

[michbich]

I'll pay for shipping if you want to get that broken marker off you hands...really

Oil
Try raising the velocity.
Thumb screw too tightg?

[rapala15]

ill try but if it was that easy wouldnt they have been able to fix it at my shop?

[Smoothice]

ill try but if it was that easy wouldnt they have been able to fix it at my shop?

Not if they didn't know anything about mags.

Does it leak when aired up?

When you air it up do you hear the sear reset and see the trigger rod push the trigger forward?

[secretweaponevan]

rapala15, where do you live?

I guarantee there is a maggot within 30 miles of you that can fix your marker.

Or, you can order an o-ring kit, watch the Tom Kaye videos (on youtube ) and become an expert like the rest of us. :)

[MANN]

rapala15, where do you live?

I guarantee there is a maggot within 30 miles of you that can fix your marker.

I work on markers for beer.

[Dend78]

I work on markers for beer.

funny i work on beer for markers

[rapala15]

I live in Richmond, VA. I acquired the gun through a trade for another but ended up just paying the guy for the other gun so thats why I dont know much about it. When I put air in it, the 1st shot is fine, then after that i click and its like a thud noise. After like 30 sec it will build up and let me fire again. After I havent fired for a while I can hear air escape and feel it out of the velocity hole. Still o'ring stuff?? It sound's more like it would be I just dont want to go spend any money not needed ya know? Thanks for the replies by the way.

[michbich]

Is the reg piston greased properly and what is the condition of its oring?

[rapala15]

i got it working...for now...haha

I took it apart and wiped it down and increased the velocity. I had my compressed air tank in it then used my co2. it worked with the co2. that mean i cant use compressed air with it or was it just a fluke? thanks again

[michbich]

It can be used with HPA. Do you have LP reg on your tank?

[DamianTC]

can you still send your gun to AGD?

[MANN]

you can.....but usually most of us can tell you how to fix your marker.