Spyder EM1 question. Clacking?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TeamBob
    SKYLINE PAINTBALL
    • Sep 2008
    • 976
    #1

    Spyder EM1 question. Clacking?

    I have a Spyder Em1 which i got back out of my old gear bag the other day. I havent shot this gun in atleast 2 years. Dont think it was shooting ext. right when i put it away, but cant remember. I put a new battery in it and aired it up...

    As soon as i aired it up, it did shoot, but had an awful clacking sound coming from it. I believe that it is the hammer slapping forward too hard. Actually im pretty sure thats what it is. This pressure going n2 the gun is at 300. This is what i used to run my other Em1s at and they shot great. Does anyone have any idea what may be causing this?

    Any and all help is greatly appreciated. And this gun mabe up for sale if any would be interested...
    Tags: None
    • Rudz
      Registered User

      • Apr 2005
      • 5087
      #2
      im not 100 percent sure, but i think 300 is too much, but dont quote me on that, try turning it down
      BEO MAFIA
      sigpic

        Comment

        • 211
          Ave Dominus Nox
          • May 2007
          • 555
          #3
          try turning down the lpr a little
          sounds like your ram is working harder than it needs to

            Comment

            • TeamBob
              SKYLINE PAINTBALL
              • Sep 2008
              • 976
              #4
              thats not it

              thats not it. I tried that before i posted. Now i just tried it again, i went 200-300. Much lower then 300 and you can tell its not gonna chrony right and it still is clacking. 200 lightented the noise, but only from the lack of pressure. Its still clacking. The bolt is connected to the ram via a pull pin. The noise it is making is as if i pulled the pin and bolt out, and just let the ram shot by itself. Something is making the ram hit way to hard. Any other suggestions?

                Comment

                • secretweaponevan
                  Only HALF Polish!
                  • Sep 2007
                  • 1132
                  #5
                  Looking at the schematic it looks as if there are 2 regulators.

                  The primary (with a guage) and the LPR (coming out the front).

                  Are you turning down your LPR or your primary reg? Your LPR might be set too high.

                    Comment

                    • Dend78
                      Si Vis Pacem, Para Bellum
                      • Oct 2004
                      • 2963
                      #6
                      spyder clacking? arent they supposed to do that evan is right it sounds like your LPR is a lil on the high side
                      2k2 Angel LCD
                      turbo trigger
                      CP volumizer
                      PIPE KIT

                      2k Angel CnC LCD
                      Vert Frame
                      Freak Barrel

                      B2k x-milled
                      micro rock
                      Dye sticky 3's
                      vertical max-flo
                      Edge barrel with blue J&J tip

                      Egg 2 y board
                      Empire Reloader
                      Dye Throttle 91/4500
                      Crossfire 114ci/3000
                      Angel Air Reg

                        Comment

                        • TeamBob
                          SKYLINE PAINTBALL
                          • Sep 2008
                          • 976
                          #7
                          um

                          I took the stock pos reg(with guage) off, like every1 else does, had now have a vert max-flow on it. i was adjusting the maxflow. I will try adjusting the lpr on the front. We shall see what happens from there. Thanks for the advice

                            Comment

                            Previous template Next
                            Working...