Qbow issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CatoRockwell
    Woodsballer
    • Jul 2008
    • 704
    #1

    Qbow issue

    Ok, so after months of hell trying to get special ops to get my qbow shroud together they finally sent it to me. Now ****ty customer service aside, they didn't exactly send me all the parts I'd need to convert it to a qbow kit. The bolts that connect the forgrip to the frame are too short to mount Special Ops' qloader mount and still screw in the forgrip. I have searched everywhere I could think of, does anyone know the specs on the forgrip bolts? I don't want to have to wait 5 months for special ops to send me the longer bolts, so If I could just get the specs I could go to home depot and get them.

    Again thanks for the help.


    BTW, stay the hell away from special ops paintball. If you want a good woodsball kit for your Tac One I would suggest going w/ a warped feed, qloader, and T2W stock. Sure the longbow kit looks cooler, but special Ops has bar none the worst customer service in the industry and if I had to go back and do it again I wouldn't have bothered with the shroud kit.
    Tags: None
    • Looper
      Registered User
      • Sep 2007
      • 754
      #2
      Another satisfied customer... Excellent...

      I feel your pain, Been there and got the t-shirt. Had the Longbow/qbow kit, Had being the proper tents, Too bad you waited this long. after you get a chance to play with the setup your probably going to sell it all off...

      I do not know the specs but you should be able to bring your rail, qbow adapter and fore grip parts into local hardware store and test for the screws you need.

      Good luck

        Comment

        • CatoRockwell
          Woodsballer
          • Jul 2008
          • 704
          #3
          Already have played with it, and I do like the way it works, so I don't think I'll be selling it off. I'd just never go through this bull**** ever again. The reward is too small and the hassle too large. Way to go Spec Ops you just lost yet another customer.

            Comment

            • Sumthinwicked
              team id psycho AO-CT
              • Nov 2005
              • 4292
              #4
              i never had any issues with cs ? the screws are usually short .5 long at most just go to home depot with your rail and shroud they should have the right size

                Comment

                • Eddie9195
                  Registered User
                  • Nov 2004
                  • 94
                  #5
                  I think those bolts are 10/32 thread and an inch long.

                  Just take the ones included to Ace and get the same diameter/thread pitch you need, but a little longer. Should be about 40 cents each or so.

                    Comment

                    Previous template Next
                    Working...