Myth regulator with mag

[Greg2230]

This is probably a stupid question but will my automag will run fine off of a myth regulator? I know it puts out ilke 600psi it should be fine right? Also will the myth fit in any bottle? I have a SCI bottle. Thanks

[Dend78]

the reg will fit any of the DOT-E bottles, as far as for the mag it need the HP spring in it to put out like 800, 600 will work but not very well

[Greg2230]

Ahh!! Thats perfect. Thanks. So if I get a myth reg and put the HP springs in it, it will work perfect with my regular mag?

[michbich]

Ahh!! Thats perfect. Thanks. So if I get a myth reg and put the HP springs in it, it will work perfect with my regular mag?

Yes, as long as you have 800psi output or more.

[Greg2230]

Is there a way to test the output pressure?

[Greg2230]

I have heard that it doesnt matter if you change the springs on these cause they are made for both low and high pressure guns. I talked to someone that did change the spring and had no results. It still put out 650. Also, I cant find that spring for sale anywhere. Does anyone have actual experience with this? Anyone installed the spring and had it work fine with their mag?

[secretweaponevan]

Is there a way to test the output pressure?

You can use a gauge. You can find them wherever paintball goods are sold.

[flyingpootang]

I cant find that spring for sale anywhere.

You can get the springs from the manufacture. They're 10.00

http://www.guerrillaair.com/