Warp feed and Dye Rotor?

[KrazyJ]

Thats what I am currently using. I have had an issue with it and paint. the auger actually punches a hole in the paintball in the apache. Thus spreading paint all the way through the hopper, warp, and feed lines. This happened with 3 different types of paint before I finally fireged out what was happening. So I am looking for alternatives.

Thanks for the reply!

[garbageman705]

Just use a revvie, it will do fine.

[Watcher]

Thats what I am currently using. I have had an issue with it and paint. the auger actually punches a hole in the paintball in the apache. Thus spreading paint all the way through the hopper, warp, and feed lines. This happened with 3 different types of paint before I finally fireged out what was happening. So I am looking for alternatives.

Thanks for the reply!

Sounds screwy to me, my Apache always feeds great!

What kind do you have? There are ones with green wirey paddles and ones with the plastic paddles.
I have an AK with the wires and it works ok, I'd rather the plastics. My Apache has he plastics and it has never jammed once, even when overfilled.

They are cheap now, ActVil has 'em for like $20. I'd go with a replacement Apache and if you have issues with that one then look elsewhere. Besides, with the Halos and such pushing over 20bps in order to keep up the warp'd need a 12v mod. 9v is rated at 16-18 so it's almost a perfect match for the Apache... IMO.

[stoffa15]

Unfortunately, I don't know of anyone that has that combo. I use a Ricochet Apache. The shape of the front of the loader makes it look like it was made for a warp. I don't shoot all that fast so the Apache is good enough for me.

I currently us an egg on my warp feed. the evo is cheand feeds 23bps. since I don't come near 23 bps its not a problem. To be honest with you the warp isn't really made for a high rof. the main purpose of it is to eliminate hopper hits. If your shooting 15 bps you can use any elecrtric hopper out there and you'll be just as happy. I personally don't see any need to use a hopper that can feed 54 bps cause when are you going to need it???

[uv_halo]

I hope this isn't too much of a necro but, I figured that since I have this exact combo I'd share my thoughts.

I've only put 300 rounds through it so far and my god, it rocks! The Rotor sits nice and low, so low as a matter of fact, with the standard bracket, it fits under your thumb. The only limitation in how close you run it is that the nose touches the warp's output hose.

I've only got the big cell mod and I've got my gun (Intellilinked Ion) capped at 15 so, I can't say it was all that faster than any other loader but, it kept up even when I turned off the eyes accidentally- Not a single chop!

Why I have the Warp: No hopper target.

So, some of you may be wondering why I went with the Rotor to feed it. Well, my Halo B's motor was dying, I was in the local store and, I decided to compare a couple hoppers right then and there. Final factors: Durability. ease of maintenance (tool free and straightforward teardown and buildup), lightweight, and compact size.

I hope this helps!

[Looper]

Now what I want to see is a full-nose pinoccio on a warp

Here you go...

http://www.mcarterbrown.com/forums/a...tml#post728215

[Watcher]

Here you go...

http://www.mcarterbrown.com/forums/a...tml#post728215

I rather like how it looks here.

Horrible gun though

And IDK what's up with those pods...