I would use steel braided or remote line for pressure higher than 1000psi. I've run my mag on pressure between 1200psi and 1800psi while testing through a remote line with slide check and QD without any problems at all. The remote line I have is rated for 3000psi as printed on the coiled hose itself.
-
Last edited by malJohann; 07-23-2009, 02:05 AM. -
The black nylon hose from airsoldier.com is rated for 1000psi working, 3000 burst, but it doesn't seal in the fitting very well at lower pressures and temperatures. The parker hose seals very well, but like athomas says, it is rated lower (which is why it seals well). The nylon likes to leak for about a minute when it first gases up at 800 psi. For regular RT use, I still go with the steel lines.Comment
-
Just an Update.. I've installed a Max-flo reg on my tank. It's doing quite well..
It's outputting 1400 PSI Max and the Macro is holding no problem..
I captured a second of audio, slowed it down and counted 27 BPS.Comment
-
Very nice bro. I've got a 3rd gen Max-flo and Armogeddon both running macro. They work very well and rock the RT.Comment
Comment