??? who could help to make a EGO-MAG

[motodrom16]

hi,
who could help me to make a EGO-MAG?!
i have a EGO 05 frame without soli or so.... just the frame, board, tigger and eys.
i want to know, how could i use the frame on my mag.

thank you for your help!

rudi

[motodrom16]

some more facts:

frame is from my old ego 05

- frame + XSV board (1.08)
- new red eyes
- ego-grip
- org. trigger
- raguba trigger

try this link for some pics:

http://www.pbportal.de/forum/showth...9&highlight=XSV

[sgarmy]

your going to need a sear tripper a new board and some fabrication

but its do able im in the middle of the same project

[motodrom16]

your going to need a sear tripper a new board and some fabrication

but its do able im in the middle of the same project

WHY A NEW BOARD???
i saw on pics and videos the same like the one i have!

[Coralis]

ego mag how to guide from the workshop forums on this site http://www.automags.org/forums/showthread.php?t=211255

[robnix]

your going to need a sear tripper a new board and some fabrication

but its do able im in the middle of the same project

A new board isn't necessary. The XSV board is a nice board and will work fine. The PE boards also allow for the use of either of the two solenoids that ASP sells that work with this project, while all the other boards have either chips or trigger assemblys that limit you to the smaller of the two.

[robnix]

ego mag how to guide from the workshop forums on this site http://www.automags.org/forums/showthread.php?t=211255

All you really need to be able to do is drill two holes and file down the sides of the MSV-3 a bit. It's very easy, you should be able to do it yourself.

[flyingpootang]

Rudi, Pm (Josh) mann he had all the stuff needed to do an electropneu set up.....
http://automags.org/forums/showthread.php?t=233176

[motodrom16]

thanks for helping!!!!!

[sgarmy]

A new board isn't necessary. The XSV board is a nice board and will work fine. The PE boards also allow for the use of either of the two solenoids that ASP sells that work with this project, while all the other boards have either chips or trigger assemblys that limit you to the smaller of the two.

let me rephrase what i said i went to a diff style board for ease of installation