Nitro Duck X-Stream Help

[xero28]

Hey all. I didn't want to put this in the Tech forum since it doesn't really relate to mags. I've got a Nitro Duck X-Stream adjustable reg. It is supposed to adjust up to 900 psi, but I can only get mine up to around 800 psi output. Does anyone have any experience with these and might have any ideas as to what I could do to get the output any higher. Any help would be greatly appreciated. Thanks.

-X

[StygShore]

Sol

Hey all. I didn't want to put this in the Tech forum since it doesn't really relate to mags. I've got a Nitro Duck X-Stream adjustable reg. It is supposed to adjust up to 900 psi, but I can only get mine up to around 800 psi output. Does anyone have any experience with these and might have any ideas as to what I could do to get the output any higher. Any help would be greatly appreciated. Thanks.

-X

bad advertising from nitroduck - brand new you might get to 900 for about 10 shots, then it will fall and settle around 750-800 range for max output. Nitroduck was supposed to send me stronger springs for the couple of them that I tried, but their "awesome" customer service prevailed, and I never got anythign from them.

Pop the c-clip ring off and put a thin washer on the top of the spring if you want to get a little higher output. I wouldnt go more than 900-950 though as I was told by Nitroduck they have max output of 1000


Styg

[xero28]

bad advertising from nitroduck - brand new you might get to 900 for about 10 shots, then it will fall and settle around 750-800 range for max output. Nitroduck was supposed to send me stronger springs for the couple of them that I tried, but their "awesome" customer service prevailed, and I never got anythign from them.

Pop the c-clip ring off and put a thin washer on the top of the spring if you want to get a little higher output. I wouldnt go more than 900-950 though as I was told by Nitroduck they have max output of 1000


Styg

Yeah, that's what I figured. I've seen a few people posting that they don't acheive the 900 as promised. I thought the washer or something like it would work. Thanks for the info. I probably don't need it to go much higher than 900 psi. I'm getting a good RT with the 800 from it now, I think just a little bit more and I'll really be able to sweet spot it. Thanks again.

-X