tac one problems

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Paintslinger99
    Registered User
    • May 2007
    • 53
    #1

    tac one problems

    Alright so i went to play for the first time in a while today and it was great for the first 2 games. My tac one was shooting beautifully for those games, then i chopped a ball while re chronoing in between games and i chopped one. I thought nothing of it, swabbed barrel, took out x-valve and wiped it clean as a whistle. I got all ready for next game went out on field and shot a few rounds off, chopped all of them. I take it apart, swab barrel, clean the crap out of the gun, water and everything. I try her again, chops it all.

    So what could be causing this? Im thinking the lvl ten because when i went to shoot it after cleaning it i had just gotten a fresh fill and while i was dry firing she was rting hardcore and i have an 800psi output tank. The only level ten thing i know is i have gold spring, i havent messed with it since i got it because nothing was wrong. I dont have the lvl ten kit either so im gonna have to pick one up.

    p.s. This is the exact setup i am running. Tac-one stock barrel w/redz feedneck. T2W stock air thru. Remote to 88/3000 pure energy tank. with halo b loader (so i know that loading fast isnt the problem)

    p.p.s Their is a tiny leak out of the bolt but when i push the trigger in (which is why i am assuming the only problem is the sear isnt extended enough. So i probably should fix that but it doesnt bother me.

    Thanks!!
    Tags: None
    • 211
      Ave Dominus Nox
      • May 2007
      • 555
      #2
      WHat kind of loader are you using?
      have you checked out your detent, if its weak (or missing) youll get double feeding and chops

        Comment

        • Paintslinger99
          Registered User
          • May 2007
          • 53
          #3
          my detente is not the problem. I am using a halo b loader like it says in thread lol

            Comment

            • dark blade
              I<3AGD|WGP|WDP|APS|CCI|CCM
              • Apr 2008
              • 733
              #4
              hmmm well if the bolt leaks a tad when you pull the trigger all the way back then that sounds like a pin issue... that could possibly have to do with the RT problem. My guess is that you had a break, some of the paint got back into the valve (dont know how it would) and you just need to clean it all out and go from there

              the on/off pin shouldnt allow for leaks if it is working correctly.

              If you fix this problem and then it leaks from the bolt when not held back, i would venture to say that the bolt needs tuning.

              good luck. i have no other ideas other than that

                Comment

                Previous template Next
                Working...