finding that sweet spot

[Storminnorman]

OIL Mags love oil. Get yourself some gold cup and lots of it, I always get mine ready the night before. I shoot the oil out of the marker without a barrel or just use a barrel (but only for that). Put 3 drops in the valve air intake and rip 60 shots out of it while holding towel over end of marker. This sill ensure everything gets some oil and oil doesn't get everywhere. Also try removing the safety and what fps are you shooting at?

[Spider-TW]

I've been using that oil on my ego forever with out a problem 'but that's the ego'. Ive got some Outers gun oil for my P220. I'll give that a try when I get some time.

Regular gun oil works, but it will harden the urethane orings and turn them brown in about a year or so. Synthetic oils preserve the orings much better. The last Outers gun oil I saw was not synthetic is the reason I say that.

After all of this, it occurs to me that the valve may actually need cleaning and/or a rebuild kit. The reg pin and piston need to be clean and lubed to run well in RT. If you have never had it apart and you bought it used, there's no telling what condition they are in.

I was wondering why my old x-valve was limping around this weekend with only two or three RT shots when I tried. I forgot to turn my regulator back up. It was just barely making it at 750 psi.