AGD Flatline Problems Please Help

[sethbar]

Greetings
i just purchased a hpa tank and flatline system for cheep but they guy i bought it from said it needs a "check vavle"???

as i am not familiar with this reg(or hpa systems as this is my first) i do not know what it is or where to get one

if anyone has one or knows where i could pick one up that would be great.

also where to get info on installing it would be helpfull

I need to get a fill nipple for the reg. as well but does it require a special nipple with an o-ring or will it take any

thanks for any help anyone can offer up




FOUND MY SOLUTION
thanks to all that posted
looks like smooth sailin from here.....lets hope

[zondo]

Greetings
i just purchased a hpa tank and flatline system for cheep but they guy i bought it from said it needs a "check vavle"???

as i am not familiar with this reg(or hpa systems as this is my first) i do not know what it is or where to get one

if anyone has one or knows where i could pick one up that would be great.

also where to get info on installing it would be helpfull

I need to get a fill nipple for the reg. as well but does it require a special nipple with an o-ring or will it take any

thanks for any help anyone can offer up

I think the fill nipple is a standard male QD. A few of those up in the B/S/T threads.

[DamianTC]

check tunaman's flatline stuff.

http://www.tunamart.com/index.php?c=30

[BigEvil]

I think the fill nipple is a standard male QD. A few of those up in the B/S/T threads.

Fill nipples and QD's are different internally.

Yes, Tuna probably has what you need. I would suggest that you send the reg to him for a tune up. They tend to need maintenance.

[Spider-TW]

A fill nipple has a check valve inside of it. Hopefully that is the one the guy was referring to, since there are no other 'check' type valves on the flatline.

[sethbar]

lots of good info so far
thanks to all that posted

[sethbar]

check tunaman's flatline stuff.
http://www.tunamart.com/index.php?c=30

sure enough right on the AGD Flatline page "Check Valve"
good lookin out DamianTC
i had been to tuna's site once before but i forget about this kinda thing

[sethbar]

Flatline Diagram

i looked on the agd website and didnt see any blown-up views of the reg for a placement of the parts.

does anyone know of any diagrams on the web somewhere??

[Spider-TW]

Actually, this WARPIG article is the only thing I've ever found. It was enough to get started on. Just be sure and separate the parts about the 4.5k and the 3k flatlines.

[Looper]

Here is one from MCB http://www.mcarterbrown.com/forums/a...6k-beware.html

[Spider-TW]

Here is one from MCB http://www.mcarterbrown.com/forums/a...6k-beware.html

Much better for maintenance, thanks! I had neglected my on/off previously.

[sethbar]

Here is one from MCB http://www.mcarterbrown.com/forums/a...6k-beware.html

this isnt exactly what i was lookin for but i think this is gonna be better than anything else i would have found
great pictures and step by step
very informative
found precisely what i needed
thanks and good lookin out