Intelliframe mod

[Adam45]

Hi

I have an Automag RT that I'm working on. I want to put an AGD intelliframe on it but would need to drill out the field strip bolt hole to accept a Banjo bolt. It seems like a straight forward modification but I thought I should ask if there's any problem I will encounter by doing that ?

Has anyone had a problem with this?

Thanks

[DamianTC]

if you are gonna order the intelliframe from AGD, just select one from the list that says */RT and it will fit right on

[burscott]

better

Better Yet. Buy an RT Intelli from me. PM me if interested.

[Adam45]

Better Yet. Buy an RT Intelli from me. PM me if interested.

Sorry I guess I wasnt clear in my description of the circumstances. I have an Intelliframe that I am not using and want to put it on my RT. It is not the RT model Intelliframe so I would need to drill the field strip bolt hole larger for the Banjo bolt to fit. I was wondering if that is the only modification I would need to make and if it would work?

Thanks

[secretweaponevan]

Sorry I guess I wasnt clear in my description of the circumstances. I have an Intelliframe that I am not using and want to put it on my RT. It is not the RT model Intelliframe so I would need to drill the field strip bolt hole larger for the Banjo bolt to fit. I was wondering if that is the only modification I would need to make and if it would work?

Thanks

Yeah, but if you are off a bit, you could ruin it.

Your best bet is probably to buy burscott's if the price is good and then sell your intelliframe.

[Watcher]

Yeah, but if you are off a bit, you could ruin it.

Your best bet is probably to buy burscott's if the price is good and then sell your intelliframe.

Or do a trade.

Yes, you'd have to be very precise in expanding the hole but it can be done and it is that simple... Everything else should be nice and in line.