Tac-one Reactive trigger question

[rexydog]

Alrite so I bought a flatline regulator for my 88cu/in tank with the hope of getting my tac-one to fire at a decent rate. So far i can't even get a burst with a input at 1100psi. My lvl10 is tuned with a .5 carrier and 3 shims(figured I would mention that since i just retuned it today). Now here is my question...

I have been using my ULE trigger since i got the gun and just installed the RT when I got the regulator, does the RT need to break in or was it just the lvl 10 that had to break in? Could it also be my remote line causing the problem?

Thanks

[xero28]

I believe there is some break in needed. Also, are you running a 3000 psi or 4500 Flatline? I've heard that the 3000 needs higher outputs to get the RT effect going, not sure why, I think it has to do with the flow.

[rexydog]

I am running the 4500

[Coralis]

As the orings in the on/off "wear in" the mag should become more reactive .... you could also try taking out all orings in the on/off oiling them up and polishing the pin with steel polish.

[rexydog]

I'll try oiling the o-rings quick here, but I don't feel comfortable nor do I know how to polish the pin. If that doesn't work I'll just keep using the rt on/off for a few cases of paint and if I still got a problem I'll ask then. Thanks for the responses.