RT still not RTing

[rexydog]

I have ran about 5000 balls plus a few hundred dry shots through my tuned lvl10 on a Tac-One. I have about 1100 PSI output from my 4500/88 flatline regulator, but I still am unable to get the RT on/off to give me any response trigger effect other than pushing the trigger back out. Another problem I had last game was that I was short stroking when I tried to rapid fire. That is if short stroking is what i think it is... as in it fires a ball about half way down the barrel at a slow speed and then rams another one down the barrel at full speed. (That may not be short stroking clarification would be great) Anyways any help would be greatly appreciated.

Thanks

[rexydog]

I also still wonder if alot of my problems come from my remote line. I noticed when I was attaching it to the flatline regulator that the connector had a very small hole. I have asked this before though and everyone says its not my remote, and I haven't had time to take it off and just mount the tank on the gun.

Thanks for any help guys.

[MANN]

your remote can cause problems. depending on how narrow the line is. what on/off do you have installed?

[rexydog]

I have the RT on/off installed

[rexydog]

your remote can cause problems. depending on how narrow the line is. what on/off do you have installed?

I removed the remote and just put the tank right on the gun and it worked great. Would it be my remote or my quick disconnect and if it is the remote do they make higher flow ones?

[MANN]

some remotes will work the skinny hose ones will not. take a pic of your remote line, and I will try to tell you which one you have.

[rexydog]

I can't seem to figure out how to upload my pictures keeps giving me errors.

[rexydog]

http://www.facebook.com/photo.php?pid=30046523&l=122f6&id=1452295884

http://www.facebook.com/photo.php?pid=30046522&l=8cf75&id=1452295884

sigh i set up a face book page...

[MANN]

yeah. that oriface is wayyy to small. You will need to find a remote with a larger orfice on the end.

[rexydog]

yeah. that oriface is wayyy to small. You will need to find a remote with a larger orfice on the end.

Think I could just drill it out a lil bigger? I would just have to clean it out good right?

[Dend78]

you could but i dont know if i would say its a good idea, i would say look into getting another one, 20 bux and you know you have one that works well rather than taking a chance on messing that one up and having to buy another one any way

[rexydog]

What would you suggest is a good manufacture of large diameter remotes.

[Dawg047]

If you can find the PMI Remotes at any store like Dicks or a local shop, pick one of those up. They are very large and work great. Also, there was a company called Black Magic or a Black Magic remote that was large diameter and worked really well.

[Tunaman]

I have large coiled remote lines. Email me