RT on/off on a Classic valve?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Chrome
    Registered User
    • Apr 2009
    • 397
    #1

    RT on/off on a Classic valve?

    I read on another thread a suggestion to use an RT on/off assembly in a Classic valve to change the trigger pull characteristics. Seeing as there is a lot of info on the on/off assemblies and valves in the Tech Forum, a search got a little cumbersome for me. . .

    Does this work, and if so, what does it do compared to a ULE Trigger kit? Thanks!
    Tags: None
    • flyingpootang
      Magtechian with X disease

      • Dec 2005
      • 2276
      #2
      A RT on/off with a .750 in a am/mm valve gives you a light constant trigger pull.
      A ULT in a am/mm valve gives you a very very light trigger. Some say it's hit and miss, but I had no problem at all in my am/mm valve....

        Comment

        • Spider-TW
          U R techno-literate!

          • Oct 2006
          • 3554
          #3
          An RT on/off has about half the pull weight of the classic and is also good for high rate of fire in classic pneumatic setups. They are a little more sensitive to tight top on/off orings.

          The ULT is about 1/4 the pull weight of the RT on/off, but usually doesn't reset very quickly in a classic valve. How much is very quickly? Kind of like flyingpootang said, hit and miss. Some get one ball a second and others a slow walk. They have smaller ports, so valve recharge time is a limit at the least. It's a very sensitive setup.

          Flyingpootang, you're not walking a double trigger with a ULT in a classic are you? I remember your pump mag has a ULT.

            Comment

            • chill will
              DEATH DEALER
              • Jan 2006
              • 479
              #4
              It does work!!


              I have never put a ULT into a clasic valve so I cant speak on that. I do have some concerns on shot down if you put a ULT and own a dobble trigger toghther with a classic valve. Help me out on this one guys I might want to look into this. I run a single trigger on my mag with a classic valve and it gets the job done.

              edit--Posted with out reading other post. Hit or miss. The RTon/off is not and will improve your classic valve performance. If you play in the woods this helps.

              If you want to shoot faster then get a x with ult. Never owned a pneu but the x-ult and intel is hella fast for woods play.
              Last edited by chill will; 04-11-2009, 08:56 PM.

                Comment

                • flyingpootang
                  Magtechian with X disease

                  • Dec 2005
                  • 2276
                  #5
                  Originally posted by Spider-TW
                  Flyingpootang, you're not walking a double trigger with a ULT in a classic are you? I remember your pump mag has a ULT.
                  Yup, I have a ULT in my pumpmag and the trigger is ultra light. I did put a classic valve in a Emag and it fired full auto on 20bps (xmod) with out a problem. Altough I can't remember if I used a RT on/off or a stock am/mm on/off....

                    Comment

                    • Chrome
                      Registered User
                      • Apr 2009
                      • 397
                      #6
                      Thanks! I'm not looking to increase my rate of fire, just a little tweaking on the trigger is all.

                        Comment

                        Previous template Next
                        Working...