X-Valve Lvl 10 problem

[VecTor]

Sorry if this has been asked.

OK question for you mag guru's.

My X-Valve or Level 10 is acting up on me and im unsure which way to adjust it to fix it. Usually the first couple times I pull the trigger it doesnt shot. I usually hafta hold the trigger down and then it starts going. Once it starts firing its great for the game. Then I sit til the next game and same thing again. Im sure its a "tunning" thing Im just unsure what to tune and which way to go with the tunning. There are no leaks in the gun or while shooting & I have always put oil on bolt/spring and power tub + in the air line to get all the o-rings oiled.

Thanks for your help guys.

[flyingpootang]

It sounds like your L10 is sticking. Use the loosest carrier that doesn't leak while using the same L10 carrier o-ring (white).

[Tunaman]

Never oil the bolt/main spring.

[VecTor]

Thanks

Thanks guys. That did the trick.

Im now installing my pnue kit on my mag. So far so good.