My buddys got an automag.He doesnt know what kind it is.But the problem is that it is balls far right out of the barrel or he shoots two balls at once either breaks or doesnt go to far.i know this might not be to much usefor but it can use autococker barrels,And are they suppose to have ball detent.I think it needs once which one will he need.
-
-
It sounds like your buddy has a ULE mainbody since the barrel is cocker threaded.
There is supposed to be a detent screwed into the side of it just foreward of the breach(the spot where balls enter the gun from the loader).
The type that fits there is one made to fit an Angel paintball gun.
If the detent is there ( you should see it if you remove the field stip screw behind the grip, pull out the valve, and look down the barrel) it's possible that the loader you are using is too strong and is pushing balls past the detent.
If that is the case, you can lower the settings on some loaders, or remove one of the two 9 volt batteries and just use one.Last edited by frans42000; 04-18-2009, 07:51 PM. -
see he tryied a stock hopper and it did that to.Comment
-
I found the problem,It was missing a Plastic Nubbins.So i ordered a new one.Comment
Comment