2 O-Rings on Barrel....

[pbguy54]

Here is mah story and question. I received a rt with a body custom milled or basically body cut shorter at the front. It is ok looking but when i place the barrel in the gun and twist it there is about 1/4 of a barrel o ring showing becuz the cut was at an angle. I was wondering if this would hinder the perferomce since the orings are there to stop air leakage from behind the ball. Would it?

[Minimag4me]

Those o-rings just keep the barrel from wobbleing, they dont sear air or anything. You are fine.

[Predater]

If you baught it new are you sure it isnt an rt pro with the main body cut to short?

[pbguy54]

noo..

i didnt buy it new. and i said it was custom milled.

Also thanks for the input mini.

[Predater]

I didnt know. some people think things are custome when they arnt. sorry if i ofinded you. I didnt mean to. if it still holds the berrel dont worry about it. Since it is custome milled you should post picks.

[Cha0tic]

the o-rings just hold the barrel still. you should be fine.

post some pics fo you gun, it sounds cool...

[pbguy54]

k..

Thanks for all ur help. i will post pics whenever i get mah intelliframe installed...