Ok, so I have my RT classic (the one w/ the banjo bolt.) I seem to have a leak from under the body, b/w it and the rail. It isnt the banjo bolt b/c I have put a brand new one in it TWICE. It is also not the rt on/off b/c I put a new one of them in also. I have oiled the valve, replaced and lubed all Orings, replaced the regulator internals, and put in a new sear and axle. I cant think of what else it could be, but I hope one of you guys have an Idea. I thank you in advance for your help, I want to get this baby up and running again!!
-
-
u might try airin it up n dunkin it in a tub of water to pinpoint the leak. -
it is leaking out from under the body on the left hand sideComment
-
have you tried turning the banjo bolt a lil more or less?Comment
-
yeah, that worked temporarily, but then leaking continued. Im beginning to think maybe the banjo needs new Orings?Comment
-
wat gripframe are u using?Comment
-
It could be leaking out of the powertube but going down under the body.
Do you hear anything coming from the barrel?
Check your spacer to see if it is the right size.
Also check the o-ring sealing between the reg and valve half of the valve, it could be leaking out of there.
Did you remember to put an o-ring in the on/off assembly?Comment
Comment