AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
If adding a shim to the level 10 fixed your problem, then your problem will probably crop up again. All the level 10 shims do are let a misfire (that does not allow the bolt to go far enough to vent) to reset. If you are getting misfires or bolt stick, you need to fix that.
Because the shim allowed it to fix your firing problems, it sounds like you may have a ULT issue. A tiny leak in the ULT would cause a stick that could possibly be remedied with a level 10 shim and still allow it to reset. Try removing 1 ULT shim and see if that helps.
Comment