ninja reg

[Sumthinwicked]

Wow, OMG... You don't need a 2000psi reg tho do you? Like a 1000psi would do right?

click click boom lines wont hold that not macro thats for sure

[Ando]

click click boom lines wont hold that not macro thats for sure

Defiantly will need SS line for a 2000PSI setup and no Tym you wouldn't need that much unless your trying for a new BPS record...

[Watcher]

Just switched my Crossfire reg for a Ninja. The CF one busted the LP burst disc so I don't exactly trust it until I get it rebuilt, so I figured what the heck.

The Ninja outputs about 850 for me, whereas my Pure Energy tankoutputs like 825 and my CF tank was outputting 800 when I checked it after it blew.

Getting more shims in the Ninja reg will bring it to 900+ easily.

Doesn't seem to starve my automag, so they recharge well.


I'll have to play with it to really see what it is like, though.

[Tym]

Just switched my Crossfire reg for a Ninja. The CF one busted the LP burst disc so I don't exactly trust it until I get it rebuilt, so I figured what the heck.

The Ninja outputs about 850 for me, whereas my Pure Energy tankoutputs like 825 and my CF tank was outputting 800 when I checked it after it blew.

Getting more shims in the Ninja reg will bring it to 900+ easily.

Doesn't seem to starve my automag, so they recharge well.


I'll have to play with it to really see what it is like, though.

Alright, I picked up a ninja reg. My buddy tossed in a couple shims for free..

Basicaly there are two types of shims, one thick one thin, the stock reg had 2 thick and 2 thin. Stock PSI is 850...

I added 1 thick and 2 thin shims (all my buddy gave me) and it brought it up to 950-975.
And this Ripps!! I was throwing ropes of what looked like 22 - 25 BPS.. I was using a normal gravity hopper, so the lvl 10 would kick in disrupting the RT. But I empty the hopper in 2 - 3 trigger pulls.. No problems, Once I get some 9V's I'll toss the halo on and try it out..

THIS REG RIPPS! once you add a shim or two.. I give it 5 out of 5 devil horns

[Looper]

I was throwing ropes of what looked like 22 - 25 BPS.. I was using a normal gravity hopper

[Tym]

Lol yeah, I know but the halo's bats are dead.. Don't judge me!

Also I went to another store today and picked up a used regulator rebuild kit, it's got an *** load of shims in it, so once I empty the tank again, I'll add another shim, I"ll try to get it up to 1000 - 1100.. This should be even better.. Once I get new bats in the hopper, I'll make a vid..

[Tym]

Lol yeah, I know but the halo's bats are dead.. Don't judge me!

Also I went to another store today and picked up a used regulator rebuild kit, it's got an *** load of shims in it, so once I empty the tank again, I'll add another shim, I"ll try to get it up to 1000 - 1100.. This should be even better.. Once I get new bats in the hopper, I'll make a vid..

well it turns out that the shims in that other kit won't fit the Ninja, prolly a good thing too..

I"m not sure if my ninja reg is suckin or not, but it's not bumping anywhere near what it did the first couple days.. My roommates P.E reg Cranks way better than the ninja

So now I"m wondering if I should try and take it apart and relube it, or just say screw it and try for a better reg.. Any suggestions? What regs work the best RTing? So far the best I've tryed is the PE..

[Tym]

Well it seems my brand new dye gauge is off, I added another shim to the ninja and it blew the burst disk.. we removed 2 more shims and it's at 1100 now.. My gauge says 900.. So before it was at 1200 and still not RTing anywhere near my roommates PE that is at 900..

So I conclude that ninja regs suck, or at least are not as good at RTing as The old PE regs..

I will post a vid of the 2 on youtube sometime...

[Tym]

Ok well, I ditched the ninja, I guess I'll prolly sell the reg some time..
I got a max-flo. OMFG! It is killer..

http://www.youtube.com/watch?v=so7dMhj-8jY&feature=channel_page

I captured a second of audio, slowed it down and counted 27 BPS.