I finally got around to running a couple of pods through my Classic. First off, I love this thing! The accuracy was pretty respectable especially with the left over mediocre field paint I had. The absolute only issue I ran into seemed to be feeding. I was using my VL Eye Force loader that feeds at 18-19bps. It happened sporadically, but it would seem that after a shot the next ball would get hung up and with the pressure of the force fed stack above it wouldn't dislodge. I would turn the loader off and take some of the pressure off for the ball to drop. This happened about 4 times out of two pods. Is this a side effect of my force feed loader? I checked the powerfeed plug and didn't see any flat spots or knicks that might cause a ball to hang up. One side not though was that my barrel was kind of loose fitting. After I used up the last of my paint I went in and used the scotch tape mod that Tom spoke of regarding the barrel oring. Now it takes a little more effort to lock the barrel into place. Could it have been my barrel twisting a little from the cycling of the marker since it was such a loose fit? Anyways, pending everyone suggestions I'll have to wait until some parts I ordred come in since she's back in pieces again. I can't leave well enough alone, I had to get some trinkets to put on her. 
As always thanks in advance for any suggestions.
As always thanks in advance for any suggestions.
Comment