reset regular leak.. need help

[neilrmessick]

My preset 68ci tank has leaked out the fill valve for awhile, real slowly though. Not its leaking out the small port thats about the size of a pencil tip on the side of the reg. Any suggestions on a repair? Can it be outright replaced?

[secretweaponevan]

My preset 68ci tank has leaked out the fill valve for awhile, real slowly though. Not its leaking out the small port thats about the size of a pencil tip on the side of the reg. Any suggestions on a repair? Can it be outright replaced?

Your best bet would be to take it to a pro shop and have them install a new reg.

Ninja has a semi-adjustable one for $35 that works well.

http://www.ninjapaintball.com/productDetail.asp_Q_catID_E_88_A_subCatID_E_75_A_productID_E_71

[Ando]

Dude. That's a super easy fix. Unscrew your fill nipple, get a scribe or anything that will fit in the side where you attach the air hose and push the guts out of the fill nipple. There's a O'ring inside that you have to replace. Put everything back together, use tape on your threads and you should be good.

EDIT: Make sure you degas the tank

[secretweaponevan]

Hehe Ando.

I think when he said "Not it is leaking..." he meant "Now it is leaking" which would mean he has a leak that is from the body of the reg, not the fill nipple.

[neilrmessick]

Hehe Ando.

I think when he said "Not it is leaking..." he meant "Now it is leaking" which would mean he has a leak that is from the body of the reg, not the fill nipple.

right.

[Ando]

I'm a douche. Miss read.

What type of reg do you have?

[neilrmessick]

I'm a douche. Miss read.

What type of reg do you have?

crossfire.

[Ando]

There's 2 or 3 O'rings inside those regs. I've disassemble mine before and cleaned/ck'ed/replaced said O'rings Might want to ck that first. You don't need to pull the reg apart from the tank. Just unscrew the top.

Easier said then done I know

I'll try to find a picture of one broken down.

[Ando]