Pneu build

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ebbed
    Registered User
    • Apr 2009
    • 238
    #1

    Pneu build

    Tags: None
    • flyingpootang
      Magtechian with X disease

      • Dec 2005
      • 2276
      #2
      I angle mine towards the bottom of the sear leg. Hitting the bottom of the sear leg gives you the best possible leverage. As for using a full stroke of the MPA-3 and worrying about damaging your on/off is not going to happen. The MSV-2 pressure stroke is controlled by the LPR. When positioning your MPA-3 be sure to leave a small gap between your sear leg and the piston or you may get short stroking. I used a ULT in my Pneu before and found it to be more trouble than a benefit. I use a standard RT on/off with a .750 pin....

        Comment

        • Ebbed
          Registered User
          • Apr 2009
          • 238
          #3
          why did u find it troublesome?

            Comment

            • flyingpootang
              Magtechian with X disease

              • Dec 2005
              • 2276
              #4
              I took a xvalve w/ult out of a mech mag and put it in my pneu and it would short stoke when fanning the trigger. Others have had good sucesse and others didn't using a ULT.

                Comment

                Previous template Next
                Working...